WE’RE COMING TO CHICAGO! SAVE THE DATE & BOOK YOUR PLACE!

We’re delighted to announce that the 2018 User Group Meeting will be held at the Embassy Suites Hotel Downtown Chicago on Friday 12th & Saturday 13th October 2018.

We'll be packing both days full covering What's New in all our products along with projects and ideas to increase your knowledge and efficiency using the software. As well as the technical benefits, the meeting also gives like-minded CNC enthusiasts a great excuse to meet up and share knowledge as well as opportunity to bring along projects to show and discuss with other attendees.


As with previous meetings, the user group will take place over two days (Friday and Saturday) and will have a strong focus on our Aspire and VCarve software however a few of the sessions will also be relevant to Cut2D. We have a lot of new things happening in 2018, which will be showcased at this event!

Due to the great amount of positive feedback from the 2017 attendees we will once again be showcasing an exciting line up of guest speakers that will not only be showing you how they turned their passion into dollars but will also be showcasing some of the exotic materials and technologies they use for their projects.

As we sold out so fast in 2017, the 2018 event has a new limit of 300 places to give everyone a chance to attend a bigger and better User Group Meeting. The fee per person to attend is $199.00. To help minimise costs, we had made arrangements with The Embassy Suites Convention Center to offer you a discounted accommodation rate.

There are a number of alternative locations available within the area. Please contact online@vectric.com if you need any assistance/ advice.

 

CLICK HERE to book your place

CLICK HERE to book your hotel room at a discounted rate

 

We strongly advise anybody that is interested in attending this year's user group to register their place ASAP to avoid disappointment. The event has sold out every year we have held it which unfortunately resulted in a number of people missing out on the experience.

To learn more about what happened at last year's user group meeting, you can read the post-event report that we have linked below. We have also listed some of the feedback that delegates provided following last years event towards the bottom of this page.

If you have any problems with booking a place for the event or reserving a room at The Chicago hotel, then please email online@vectric.com.

 


General Information:
Agenda: N/A
When: Friday 12th - Saturday 13th
October 2018
Time: Day One - 8:30am - 5:00pm
Day Two - 8:30am - 5:00pm
Where:

Embassy Suites Chicago Downtown Magnificent Mile
511 North Columbus Drive, Chicago, Illinois, 60611, USA

Tel: +1-312-836-5900

Availability:

 

Click Here to book your place

Fee: $199
(first come first served)

Note:
The registration fee covers the 2 days of training classes plus lunch, snacks, coffee & soda during the 2 day meeting.
Cancellation Policy: Full refunds will only be available for cancellations made by August 31st 2018. After this date we will only be able to refund the meeting charge if we are able to reallocate your place/s.
Other: Unfortunately we cannot cater for any special dietary requirements at this event.

You must be 16 years of age or older to attend this event.

 


Testimonials from Vectricians that attended past User Group Meetings...

"You guys are amazing! I left the second day motivated, educated, and ready to try new things. The fact that you recorded each session ahead of time and took even more time to explain the concepts was amazing. I started reviewing the videos as soon as I got home Sunday. By Sunday night I had carved a 3d figure using the clipart and the skill steps I'd learned. Thanks for the energy and investment in time you place on making this one of the best user community events I've ever attended."

"Again, your excitement and passion were hugely motivating and helped really connect me with the skill steps you were teaching." Chris Cappelli


"The humor and camaraderie of the Vectric team made the meeting pleasant as well as informative. Thanks." John Strauss


"I'd go every year if it is anywhere near me. Believe me when I say there are few companies where I look forward to and enjoy meeting the CEO and his team. You'll are 110% by me and in this day and age, its rare and a treat." Gary Roberts


"Thank you for putting on the event. Clearly a lot of hard work, practice and energy was put in by Vectric, all of you should be proud of your accomplishments. Thank you." Ian Martin


"Very well done! Thought the whole event ran very smooth and was so informative. . It was quite apparent that a lot of thought and preparation went into this event and that is very much appreciated!!!" TJ Christiansen

 

Questions?

If you have any questions please email us >

Please register by completing the form at the top of this page, this way we can keep you informed about the meeting. More details will be emailed to to you closer to the date - final agenda, start times, venue information and directions etc.

© Copyright Vectric Ltd. All rights reserved.