You are receiving this email because you subscribed to the Vectric Newsletter via www.vectric.com

Buy NowDownload FREE Trials! HomeForum

Vectric Ltd

Vectric Newsletter Issue 20, July 2011

Free Project - "The Reader" Magazine Rack:


Magazine Rack ProjectStow your magazines with "The Reader"
Magazine Rack project, created by Michael Tyler for Vectric, ready to be enjoyed by Aspire 3 owners!

You customize the magazine front and back cover text with your own wording using Aspire 3's handy Text Tool and Distort Between Two Curves option. By also using the "Project toolpath onto 3D model" option in the V-Carve/Engraving Toolpath form, the v-carved text follows the 3D surface of the magazine pages.

VIEW PROJECT >

Upgrade to Aspire v3

 

Vectric User Group Meeting 2011


Register for the Vectric User Group Meeting 2011Discounted Accomodation Now Available!

Vectric have managed to negotiate a discounted accommodation rate on behalf of our attendees for this years user group meeting. This discount is offered on a first come first served basis, with limited availability, so book early to avoid disappointment for what's set to be the best Vectric User Group Meeting to date.

Discover more or book your reservation here


Vectric at AWFS 2011


Vectric at AWFS 2011 The AWFS (Association of Woodworking & Furnishings Suppliers) show in Las Vegas provides a showcase every other year for the very best that the woodworking industry has to offer.

Brian, James and Edward were there on the Vectric stand, meeting prospective and existing customers alike to demonstrate and discuss all the products in the Vectric range. Read More >


Case Studies:


Custom Boat Table with Diamond InlayCustom Boat Table with Diamond Inlay
"This was our first foray into cutting anything like this. The accuracy of the software, and the ease of using it, made the whole project a success.", Peter Smith

Despite pushing to use a CNC router at work for the past 15 years, Chief Engineer, Peter Smith, could never persuade management to buy one. Finally, about 12 months ago, Peter decided to buy himself a used Shopbot with Partworks (VCarve Pro) and start his own company
on the side. Read More >



Custom Carved SignsCustom Carved Signs
"I think the Vectric software, and how easy it was to use, sold me on the CNC idea even more than I already was.", Eric Erickson

Until less than two years ago, Eric Erickson, owner of Custom Carved Signs, had never even heard of a CNC router. Today, Eric is regularly making custom carved signs for a range of clientele utilizing the efficiency and power of CNC, including Vectric's VCarve Pro software. Read More >


User Showcase:


Domed Aluminium PlaqueDomed Aluminium Plaque

With just a single reference photo and Vectric's Aspire as his 'secret weapon', forum user 'Timvmax' set out to help a fellow forum user to produce a domed aluminium plaque! Originally requesting a wooden mould for the casting of an aluminium plaque, Timvmax 'cut out the middle man' by machining the entire plaque from an aluminium block!

Read More >



Toronto Ribfest SignToronto Ribfest Sign

Made from 2" HDU and backed with 5/8" plywood, this impressive sign gained an eager following on the Vectric Forum as 'Midnight Robotics' first post teased users with the unfinished piece. Since, the sign has received a fantastic paint job available for all to see...

Unfinished Piece - Finished Piece

© Copyright 2011 Vectric. All rights reserved.