Dutch Country Clock


For September Michael Tyler has created the perfect place to save and store you money. The Big Buck Bank project features a vcarve method to create engraved appearance of the front and back of an enlarged dollar bill. I got the inspiration to try this technique from a discussion on the Vectric Forum. The procedure used was to create thin component models of the front and back of a dollar bill image, import STL versions of each into separate instances of VCarve Pro 8, then create a finish toolpath with a large stepover setting to yield a line engraving effect.

The finished dimensions of this project are approximately 10.5 " W x 4 " D x 5 " T

If you go ahead and create this project, then it would be great to see a photo of your finished piece over on the Vectric Forum. Alternatively feel free to email us a picture of your finished piece at online@vectric.com.

Sign up to our monthly newsletter



Download project files

Download project filesDownload project pdf

Note:
This free Vectric project requires Aspire 8.0/ VCarve 8.0 or higher.

Upgrade to Aspire 4 Upgrade to Aspire 4

The downloadable zip file contains:

  • A printable PDF document detailing the process, step-by-step.
  • The Aspire 8.0 / VCarve 8.0 files you will need.
  • High-quality images of the finished piece.

(To 'unzip' your file once downloaded, you will need to right-click it in Windows Explorer and select Extract All)

 


© Copyright Vectric Ltd. All rights reserved.