Dutch Country Clock


This Rustic Welcome Door Plaque will add homespun charm to the entrance for your house or holiday cottage! A simple silhouette of a cabin and the vertical welcome board will help to greet vistors and make them feel at home. The heavily-grained texture is entirely vector-based. Sets of irregular vectors were automatically generated with the “Create Repeating Vector Texture Tool” in VCarve (also included in Aspire).

Two groups of vectors were profiled-on with a v-bit. Each vector group was set at different depths to yield the rough and weathered appearance. Very effective and quicker to machine than a 3D texture.

Available for VCarve & Aspire 8.5 Users.

The finished dimensions of this project are approximately 7.5" (190mm) wide x 25” (635mm) tall x 1.25" (38mm) thick.

If you go ahead and create this project, then it would be great to see a photo of your finished piece over on the Vectric Forum. Alternatively feel free to email us a picture of your finished piece at online@vectric.com.

Sign up to our monthly newsletter


Download project files

Download project filesDownload project pdf


 

Note:
This free Vectric project requires VCarve/Aspire 8.5 higher.

Upgrade to Aspire 4 Upgrade to Aspire 4

The downloadable zip file contains:

  • A printable PDF document detailing the process, step-by-step.
  • The VCarve/Aspire 8.5 files you will need.
  • High-quality images of the finished piece.

(To 'unzip' your file once downloaded, you will need to right-click it in Windows Explorer and select Extract All)

 


© Copyright Vectric Ltd. All rights reserved.