My first Cut2D program

The Gallery is for posting photographs and images of work machined using Cut2D
Post Reply
fr4j4n
Posts: 7
Joined: Mon Aug 04, 2008 11:30 am
Location: France
Contact:

My first Cut2D program

Post by fr4j4n »

It's my first program and look not so bad. I've just used a "Futurama" font and cut.

Thanks for this good program.
Attachments
this is what i call a "bock" !!
this is what i call a "bock" !!
The second one
The second one
Closer view of the first bock (? not sure of my translation)
Closer view of the first bock (? not sure of my translation)
Just finish cut. Material is plywood 10mm height. The two parts have 4 bridges 2x2mm
Just finish cut. Material is plywood 10mm height. The two parts have 4 bridges 2x2mm

User avatar
lovebugjunkie
Vectric Wizard
Posts: 351
Joined: Tue Jul 10, 2007 1:12 am
Model of CNC Machine: Romaxx HS1
Location: USA

Post by lovebugjunkie »

Nice results, and thanks for giving me some ideas on making coasters.

george

User avatar
metalworkz
Vectric Wizard
Posts: 2463
Joined: Mon Mar 31, 2008 3:26 am
Model of CNC Machine: SX3 CNC, DIY 24x20 & 48x60 routers
Location: Modesto, California 95358 USA

Post by metalworkz »

Hello,
Nice looking coasters! I am not familiar with Slurm though, is it a soft drink? Thanks for sharing the pictures with us.
Best regards,
Wes
wes.spence@comcast.net
Gingery Machines:
Lathe, Horiz. Mill, Shaper, Leaf Brake

fr4j4n
Posts: 7
Joined: Mon Aug 04, 2008 11:30 am
Location: France
Contact:

Post by fr4j4n »

metalworkz wrote:Hello,
Nice looking coasters! I am not familiar with Slurm though, is it a soft drink? Thanks for sharing the pictures with us.
If you don't know Slurm , you can read an explanation here : http://www.gotfuturama.com/Information/Encyc-66-Slurm/

So Coaster is what we call "Bock" in France, right ?

User avatar
Thkoutsidthebox
Vectric Wizard
Posts: 1487
Joined: Wed Oct 25, 2006 3:19 pm
Location: Europe

Post by Thkoutsidthebox »

Very nice. Your getting some nice tight detail. :)

Post Reply