Hey Guys...
Been awhile..
Here is a recent project I finished.
It is all white oak.
Works GREAT!
- Grease
RC transmitter tray
- Greasetattoo
- Vectric Wizard
- Posts: 854
- Joined: Sat Mar 24, 2007 3:14 pm
- Location: Saint Paul, Minnesota
- Contact:
-
- Vectric Wizard
- Posts: 970
- Joined: Tue Mar 20, 2007 6:29 am
- Model of CNC Machine: ShopBot prt with 4g upgrade
- Location: Visalia, Ca
Re: RC transmitter tray
Pretty Cool Grease .. I take it you are flying the helicopter ? ... by the way might want to remove first picture if that is your SSN
Kent
Kent
- Greasetattoo
- Vectric Wizard
- Posts: 854
- Joined: Sat Mar 24, 2007 3:14 pm
- Location: Saint Paul, Minnesota
- Contact: