Routed these insert grilles with aspire. Used a step down radius bit on the profiles
then came back with rest maching at all the corners with a 1/16" ballnose bit.
Each grid was about 11" x 30" and took around 30 mins to complete. Material was
just 1/4" mdf finished to match existing cabinets.
John
Thank you Aspire!
Thank you Aspire!
John
Skyline Cabinets
Biesse Rover G
Weeke ABD
CabnetworksV11,S2M V5,Acad2015,Aspire3.5,TopSolid
Skyline Cabinets
Biesse Rover G
Weeke ABD
CabnetworksV11,S2M V5,Acad2015,Aspire3.5,TopSolid
Re: Thank you Aspire!
Very nice gothic style grills. I can't imagine hoe long that would have taken with a bandsaw, router, sanding, etc.
Phil
Phil
-
- Vectric Craftsman
- Posts: 270
- Joined: Thu Dec 03, 2009 7:36 am
- Model of CNC Machine: CAMaster 508 ATC + Rotary
- Location: Snohomish, WA
- Contact:
Re: Thank you Aspire!
Very nice doors John, thank you for posting.
Mick Martin
Aspire 4.015
http://mickmartinwoodworking.com/
Aspire 4.015
http://mickmartinwoodworking.com/
- mboydraska
- Vectric Craftsman
- Posts: 238
- Joined: Sun Jun 10, 2007 12:07 am
- Model of CNC Machine: 3 axis homebuilt
- Location: Iowa
- Contact:
Re: Thank you Aspire!
Those are very nice, mdf? Tell us about the finish process if you please. Those look great.
HAPPY CUTTING
Mike
Mike
Re: Thank you Aspire!
I wish I could, we use an outside source finisher that is a real artist. I leave all that up to him
John
John
John
Skyline Cabinets
Biesse Rover G
Weeke ABD
CabnetworksV11,S2M V5,Acad2015,Aspire3.5,TopSolid
Skyline Cabinets
Biesse Rover G
Weeke ABD
CabnetworksV11,S2M V5,Acad2015,Aspire3.5,TopSolid
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: Thank you Aspire!
i love it when i see a cabinetmaker using this software!!! excellent work
Re: Thank you Aspire!
How did you attache the pice to the machine?
Did you make this out off one whole plate?
Look forward too you replay
Regards
Asgeir-Ove Dahl
Dahls Interiør Norway
Did you make this out off one whole plate?
Look forward too you replay
Regards
Asgeir-Ove Dahl
Dahls Interiør Norway
- Nice Carvings
- Vectric Craftsman
- Posts: 189
- Joined: Thu Oct 16, 2008 5:46 pm
- Model of CNC Machine: Hytek Tools Sign Master HT4896
- Location: Central Minnesota
- Contact:
Re: Thank you Aspire!
Very nice cabinets and it's hard to believe they are mdf!
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Thank you Aspire!
Man!!! That is an excellent design and it gives me a lot of inspiration.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
- dealguy11
- Vectric Wizard
- Posts: 2459
- Joined: Tue Sep 22, 2009 9:52 pm
- Model of CNC Machine: Anderson Selexx 510
- Location: Henryville, PA
Re: Thank you Aspire!
And thank you for the idea. Just pitched something similar - different pattern but same machining approach - to a customer and got the work.
Steve Godding
Not all who wander (or wonder) are lost
Not all who wander (or wonder) are lost