Pizza Cutter!
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Pizza Cutter!
Now this is a pizza cutter on steroids!
It is Red Oak and Poplar laminated together with a 1/2 Oz. domed copper bullion coin for an accent.
With it's 4" cutting wheel it will cut any pizza it come across!
It is Red Oak and Poplar laminated together with a 1/2 Oz. domed copper bullion coin for an accent.
With it's 4" cutting wheel it will cut any pizza it come across!
- mikeacg
- Vectric Wizard
- Posts: 659
- Joined: Sun Nov 02, 2008 10:53 pm
- Model of CNC Machine: Camaster Stinger, Sidewinder, SB 4x4
- Location: Newberry, MI
- Contact:
Re: Pizza Cutter!
I don't eat pizza but that is so cool I may have to try to make a steampunk version of it just to show off!
Good job!
Mike
Good job!
Mike
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
4-Up 2 Sided Cut Pizza Cutter 3D!
4-Up 2 Sided Cut Pizza Cutter in 3D!
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: Pizza Cutter!
What do you mean you don't eat pizza? Nice Job! Don't change a thing.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Vectric Craftsman
- Posts: 115
- Joined: Mon Sep 22, 2008 8:03 am
- Model of CNC Machine: Home built
- Location: Tasmania Australia
Re: Pizza Cutter!
Nice job!!
That handle design could be converted to use for a walking stick also?
Cheers,
Kym
That handle design could be converted to use for a walking stick also?
Cheers,
Kym
-
- Vectric Wizard
- Posts: 771
- Joined: Sat Jan 09, 2010 7:28 am
- Model of CNC Machine: cnc mako shark ext bed with HD 5 gantry
- Location: Buffalo,NY
Re: Pizza Cutter!
Nice design for a pizza cutter. I like how it forms to the hand. The design could be used on other stuff that needs a handle. Thanks for showing it.
Tony
Tony
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Re: Pizza Cutter!
I originally designed it as an ergonomic walking stick handle and it worked so well at that, that I thought I would give a try on a pizza cutter...
-
- Vectric Craftsman
- Posts: 123
- Joined: Thu Nov 01, 2012 2:05 am
- Model of CNC Machine: Camaster Panther 4x8
Re: Pizza Cutter!
Looks good. Pass the pepperoni, please.
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: Pizza Cutter!
Great design, Bill...mighty handy, too!
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Posts: 10
- Joined: Mon Aug 29, 2011 5:27 pm
- Model of CNC Machine: CNC-Shark
- Location: Dallas, Texas
Re: Pizza Cutter!
I like the look of that cutter.
Just one thing I see that might improve the project. If you flip and turn every other handle you could get more handles out of the same size stock and would lower the cost of each cutter.
Just one thing I see that might improve the project. If you flip and turn every other handle you could get more handles out of the same size stock and would lower the cost of each cutter.
-
- Vectric Wizard
- Posts: 2596
- Joined: Fri Dec 21, 2007 1:57 am
- Model of CNC Machine: CAMaster 508 ATC
- Location: columbia sc
- Contact:
Re: Pizza Cutter!
Lord that looks like an excellent tool,, having stuck my thumb in the same tablesaw twice, it scared the %$&* outa me !!
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Re: Pizza Cutter!
I tried that, but with two sided cutting and the use of tabs made it too unstable for an accurate cut.mebell wrote:I like the look of that cutter.
Just one thing I see that might improve the project. If you flip and turn every other handle you could get more handles out of the same size stock and would lower the cost of each cutter.
- BSImages
- Vectric Wizard
- Posts: 340
- Joined: Fri Jan 20, 2006 7:36 am
- Model of CNC Machine: Home designed and built.
- Location: Pine Grove, California
- Contact:
Re: Pizza Cutter!
Here is the work in progress...