Made this sea chest from cherry. The hardware is from an online woodworker's supply company...not the highest quality but it was what the customer wanted.
The eagle, carved in Aspire on the front, is the device worn on a Coast Guard commissioned officers hat. The chest is designed to where the removable shadowbox will self center when placed in the sea chest. The chest is essentially constructed of raised panels.
I have about 40 hours of modeling time in the eagle...really pleased with the degree of detail in the finished carving.
Mike
sea chest
- bill_w
- Vectric Wizard
- Posts: 435
- Joined: Wed Sep 08, 2010 12:19 pm
- Model of CNC Machine: PRSalpha BT48
- Location: Milwaukee,WI
Re: sea chest
The customer is always correct.Made this sea chest from cherry. The hardware is from an online woodworker's supply company...not the highest quality but it was what the customer wanted.
Your customer should very pleased, Excellent work very nice and well done.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: sea chest
Great job. That's a very good eagle, as well.
Angie
Angie
- mtylerfl
- Vectric Archimage
- Posts: 5865
- Joined: Thu Jan 29, 2009 3:54 am
- Model of CNC Machine: -CarveWright CNC -ShopBot Buddy PRSAlpha
- Location: Brunswick, GA
Re: sea chest
Quality work and wonderful modeling on the Eagle. Thank you for posting. Looks pro all the way.
Michael Tyler
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
facebook.com/carvebuddy
-CarveWright CNC
-ShopBot Buddy PRSAlpha CNC
-
- Vectric Craftsman
- Posts: 128
- Joined: Tue Feb 14, 2012 5:26 am
- Model of CNC Machine: Roland MDX-40A
- Location: Lake Barrington, IL
- Contact:
Re: sea chest
The eagle modeling and carving is outstanding! Congratulations
Bob Armbruster
www.ArmbrusterCo.com
www.ArmbrusterCo.com
-
- Vectric Apprentice
- Posts: 79
- Joined: Sat Dec 24, 2011 2:17 pm
- Model of CNC Machine: Laguna Swift
- Location: Gloucester, VA
Re: sea chest
Thanks for the feedback...I've learned a lot from viewing examples and reading tips from members of this forum.
Mike
Mike
- esteeme1
- Vectric Wizard
- Posts: 2132
- Joined: Tue Nov 02, 2010 3:26 pm
- Model of CNC Machine: Cobra 404 ATC; ROMAX WD-1; Shark
- Location: Chesapeake VA
- Contact:
Re: sea chest
That's what I'm talking about Mike. Excellent craftsman ship there shipmate!!! The raised panels all around, sweet! The modeling is really good too.
Thanks for posting.
Thanks for posting.
Jim Darlas
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
"Can Do!"
http://www.esteemedwoodcrafts.com/
http://www.esteemedplaques.com/
-
- Posts: 11
- Joined: Tue Feb 12, 2013 6:20 am
- Model of CNC Machine: Shark
- Contact: