newbie / first job using cnc machine and vectric
newbie / first job using cnc machine and vectric
Just starting to install onsite and will post more pictures when all finished, a project for a reception area with signage for the wall , I wouldn´t have been able to design and build without vectric and reading the forums so well done to all on your posts, top on the counter is Krion a solid surface from porcelanosa cut in sections the joined the sign is 6mm acrylic on top of black dibond with rgb strip thought the full perimeter as its 1.5 m x 1.5 m
Gavin Morrison
- Rcnewcomb
- Vectric Archimage
- Posts: 5887
- Joined: Fri Nov 04, 2005 5:54 am
- Model of CNC Machine: 24x36 GCnC/WinCNC with ATC
- Location: San Jose, California, USA
- Contact:
Re: newbie / first job using cnc machine and vectric
Pretty cool first job. Our first job with the CNC was a simple mantle carving. Yours is much more ambitious. Well done.
- Randall Newcomb
10 fingers in, 10 fingers out, another good day in the shop
10 fingers in, 10 fingers out, another good day in the shop
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: newbie / first job using cnc machine and vectric
Wow..can't wait to see your second job.
Angie
Angie
- bill_w
- Vectric Wizard
- Posts: 435
- Joined: Wed Sep 08, 2010 12:19 pm
- Model of CNC Machine: PRSalpha BT48
- Location: Milwaukee,WI
Re: newbie / first job using cnc machine and vectric
Very nice.
Computers-Yuk....I should junk it...It never does what it should do...only what I tell it.
Re: newbie / first job using cnc machine and vectric
update on the project passing by later today when the electrician should have all the lighting powered up
Gavin Morrison
Re: newbie / first job using cnc machine and vectric
forgot to upload the finished job
Gavin Morrison
- zeeway
- Vectric Wizard
- Posts: 3157
- Joined: Thu Feb 11, 2010 9:24 pm
- Model of CNC Machine: Self-built
- Location: SC, USA
Re: newbie / first job using cnc machine and vectric
Very impressive.
Angie
Angie
Re: newbie / first job using cnc machine and vectric
Thanks angie, I'm happy how it turned out
Gavin Morrison
-
- Vectric Wizard
- Posts: 678
- Joined: Thu Jan 15, 2009 1:08 am
- Model of CNC Machine: AXYZ 5010
- Location: Maryhill Ontario Canada
- Contact:
Re: newbie / first job using cnc machine and vectric
Beautiful Job.
I'm going to have to hire a cleaner like yours. Wow, is your shop ever clean!
I'm going to have to hire a cleaner like yours. Wow, is your shop ever clean!
Re: newbie / first job using cnc machine and vectric
wow, nice work! What material is that chrome sheeting..?