Vinyl Cutting

An area to upload images of pieces cut using VCarve Pro
Post Reply
User avatar
fretsman68
Vectric Wizard
Posts: 1084
Joined: Tue Sep 02, 2008 7:16 pm
Location: Pa. USA

Vinyl Cutting

Post by fretsman68 »

Ok, so I've been wanting to do this for awhile and finally got around to it.

Thanks to Tweakie and Greolt for their help as I've watched and learned about this through both of them. I used a Roland vinyl cutter/plotter using Greolts method and it's working great. Needless to say, there's some learning on how to set up the cutting process, but it's really simpler than I first imagined.

A few examples of things I've made for myself and friends as well. I'm also including a short video for your amusement......lol!



Thanks again, all-
Dave
Attachments
Misc1stcuts.jpg
--------------
Dave

sailfl
Vectric Wizard
Posts: 377
Joined: Sat Dec 15, 2007 3:46 pm
Model of CNC Machine: MechMate
Location: Orlando, FL

Re: Vinyl Cutting

Post by sailfl »

Would you post a link to the instructions you used.

Thanks

hdtheater
Vectric Craftsman
Posts: 183
Joined: Tue Apr 27, 2010 11:00 pm
Model of CNC Machine: CNC RouterParts Pro 48x96
Location: DFW Texas

Re: Vinyl Cutting

Post by hdtheater »

I am also interested. I have been looking at vinyl cutters lately and as much I love new tools(toys) I am running out of space in the shop!

-Eric
Thanks,

-Eric

User avatar
fretsman68
Vectric Wizard
Posts: 1084
Joined: Tue Sep 02, 2008 7:16 pm
Location: Pa. USA

Re: Vinyl Cutting

Post by fretsman68 »

Absolutely, here is the thread that helped out quite a bit for me:

http://www.vectric.com/forum/viewtopic.php?f=28&t=4869

Dave
--------------
Dave

Post Reply