Gedenktafel für Militärangehörige

Jimmy decided to put his CNC routing skills to good use and designed and carved a magnificent 4' diameter 3D plaque depicting the seal of the United States plus all of the US Military emblems.

After preparing and presenting his concept design to friends and fellow ShopBot forum members. Jimmy decided to expand the design to include engraved text for each of the armed forces emblems and to add a decorative 3D rope border.

The military emblems were all modeled by James Booth at Vector Art 3D and Jimmy used Aspire to place them into his design and add the required text and toolpaths.

Jimmy commented “Aspire’s 3D modeling and toolpath preview tools showed me exactly what the plaque would look like at all stages of the design and cutting processes.

This really helped give me the confidence that what I was seeing on the computer screen is what would be carved on my ShopBot CNC router”.Jimmy bat seinen Freund Rick Boyce um Hilfe, der großzügig seine Zeit zur Verfügung stellte, um die Gedenktafel zu bemalen und fertigzustellen.

Eine Gedenktafel für die Veteranenbehörde (VA) zu stiften, klingt einfach und unkompliziert, doch da es sich um eine staatliche Einrichtung handelt, musste Jimmy zunächst die Genehmigung dafür einholen.

Also schrieb er an die VA, erklärte sein Vorhaben und fügte Fotos seiner geplanten Gedenktafel bei. Die VA fand die Idee hervorragend, und das Projekt wurde von der Leiterin des Freiwilligendienstes, Janet S. Longhorne, umgehend genehmigt.

Daraufhin machte sich Jimmy an die Arbeit und fertigte die Gedenktafel auf seiner CNC-Fräse an.

Am 26. Mai 2009 überreichten Jimmy, seine Frau und der Maler Rick die Gedenktafel im medizinischen Zentrum. An der Zeremonie nahmen zahlreiche Veteranen teil.

Diese wahrhaft erstaunliche Gedenktafel dient als dauerhafte Erinnerung für alle und kann in der Empfangshalle des McGuire VAMC, Richmond,
VA 23249, besichtigt werden.Jimmy wishes to thank everyone who helped with the project and he said "The most important tool was his friends and fellow forum members for their inspiration and design ideas that helped make the plaque such a great success".

The 3D plaque was routed on Jimmy's ShopBot CNC router from 48" x 48" x 1 1/2" thick foam board using the following tools.

1/4" end mill cutter with a 22 degree included angle V-bit to pocket out the top surface and engrave the details raised lettering, and this took around 4 hours to machine.

1/8" diameter rounded ball nose cutter to 3D machine the 3D POW MIA seal and military emblems that took 10 hours.

The recessed text inscriptions below each military emblem were engraved using a 60 degree included angle engraving cutter and this took around 30 minutes to machine.

Finally the raised 3D rope border was machined using a 1/4" ball nose cutter and took approximately 4 hours.

To see more of Jimmy's work visit his web site by clicking here
>